21
OPERATOR MANUAL
/ / -OB/
MACHINE OPERATION
Pre-Operation Checks
Sweep or dust mop the surface to be
cleaned.
Make sure that the battery is fully
charged before using it.
Check battery meter to make sure bat-
teries are fully charged. (See BATTERY
CHARGING).
1.
2.
Operating the Machine
Lower squeegee assembly to the floor
by lowering the squeegee lift lever(see
machine components, item #33).
(See Fig. 10)
Lower the scrub head to the floor by
stepping on the scrub head lift pedal
(see machine components, item #26).
(See Fig. 11)
Swiping the ID card (see machine
components, item #3) to turn on the
machine.
Check the battery meter (see Panel
components, item #2), if the battery is
very low, there will be a Fault code &
message on the LED display screen (see
Fault code section), and the Fault indi-
cator will blink contiunously accompany
an audible alarm.
Please DO NOT continue to operate the
machine and recharge the batteries
immediately.
1.
2.
3.
4.
Check that squeegee is properly in-
stalled.
Check that brush/ pad is properly in-
stalled.
Do not attempt to clean large pieces
after rock or wood.
3.
4.
5.
Figure 10
Figure 11
