5
Unscrew the knobs
under the front of the
seat and slide the clips
off the frame cup in
which the seat sits.
The nuts should not
have to be screwed
down they should be
left at the end of the
screws as seen here. .
They are there to
prevent the knob from
being unwound too far
and falling out.
Release the quick
release QR (Quick
Release) on the seat
angle adjustment.
Remove the seat
Release the QR on
each handlebar and
swing it backwards
until each is horizontal.
Re-fasten each QR.
Undo the QR on the
hinge
