6
Swing the QR and its
connecting pin
backwards 90
degrees.
Lift the QR and its pin
to release the safety
catch.
Swing the rear section
of the frame up and to
the left.
Be sure to lift the
chaintubes as shown
in the photo. This will
allow the chain to fold
over properly
Put the cushion mat
between any parts that
touch after the fold.
Unfolding your trike is the same sequence in reverse order. To unfold your trike:
Swing the rear section of the frame up and to the left and then down to the unfolded position.
Put the cushion mat in a safe place for next time you fold the trike.
Lift the QR (Quick Release) latch to retract the safety pin, and close the hinge. Make sure the safety
pin is properly engaged.
Swing the QR and its connecting pin forwards 90 degrees (into the slot on the front part of the hinge).
Tighten the QR on the hinge. If the QR is loose, the adjusting nut may be tightened slightly.
Release the QR on each handlebar and swing them forward until each is vertical. Re-fasten each QR.
Put the seat in place and slide the clips on the bottom seat rail over the frame cup in which the seat
sits.
Tighten the knobs under the front of the seat.
Secure the seat angle adjustment onto the QR and tighten the QR.
Make sure everything is secure before riding your trike.
