ICE AIR ccHPWH Series, Installation And Maintenance Manual

Page: 15 / 50

12
IV. Installation
1. Product handling
•
Confirm the unit has sufficient space for safely rigging it into place.
•
Remove the protective packaging just prior to installation.
•
During handling, the inclination of the unit shall not be more than 15° to prevent the unit from overturning.
•
When rolling transportation is used, the same size rollers shall be placed under the base of the unit. Each
roller must be a little longer than the outer frame of the base and suitable for the balance of the unit.
•
When hoisting, the hoisting cable shall be rated for minimum of 3 times the weight of the unit. Check and
ensure that the lifting hook is fastened to the unit, and the hoisting angle is greater than 60°. Add cloth or
hard paper between the unit and the wire rope to prevent damage to the unit. Hoisting diagram is as follows:
2. Installation site selection
•
The unit shall be installed in a location with ample space to allow for sufficient air flow and maintenance of
all components.
•
If the unit is in a place accessible to unauthorized personnel, isolation safety measures should be taken,
such as setting up protective fence, etc.
•
Select locations where the sound from the unit and cool air leaving the coils will not affect the surrounding
environment including nearby building occupants.
•
The location shall facilitate the installation and maintenance of pipes and electrical connections.
•
Ensure a sound foundation if mounted on grade and sufficient vibration isolation if roof mounted.