Icare HOME2, Quick Manual

Page: 7 / 56

13 12
6
Measuring eye pressure
Start the measurement
when you see only a
symmetrical green ring.
Press the Measure button
once. The probe gently
touches your eye.
If the probe base flashes
red and you hear multiple
beeps, the measurement
was not successful. See
Troubleshooting on page 16.
A single beep indicates a
successful measurement.
Continue taking measu-
rements until you hear a
long beep and the light in
the probe base
turns off.
1x
START
6x
A measurement sequence consists of
six measurements.
Tip: You can also take the measurement
sequence by pressing and holding the
Measure button down until all six
measurements have been taken.
When all six
measurements have
been successfully taken,
you hear a longer beep,
the light in the probe
base turns off, and you
see the result on the
display.
Press the Measure button
once and repeat the
measurement on your
other eye.
START