iCanView222 User’s Guide
y
MIC /LINE IN :
Connect external audio source or microphone. If external audio is connected,
embedded microphone will be disabled.
Use Standard stereo earphone jack for the connection
Audio In
Ground
Not used
Audio In
Ground
Not used
Audio out
Ground
Not used
Audio out
Ground
Not used
Figure 2-3. Pin assignment of the plug for MIC/LINE In (left) and
LINE OUT (right)
y
LINE OUT : Connect speakers with built in amplifier. Audio from remote site is output through
Line out in bi-directional audio mode.
Use Standard stereo earphone jack for the connection.
y
100BaseT 802.3af
: 100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af).
- LINK LED : Continuous yellow light means that network cable is plugged in. It will flicker
when there is traffic.
- Status LED: Green color indicates that the camera is in normal operation mode, while RED
color indicates that the camera is in abnormal condition.
y
RS-232C
3 Pins on the right of the connector are assigned for RS-
222 port. Please note that leftmost
pin is numbered as 1.
Pin
Description
Misc.
1 Not
used
2 Not
used
3
RxD of RS-222C
For debugging & factory use only.
4
TxD of RS-222C
For debugging & factory use only.
5
Ground of RS-222C
For debugging & factory use only.
y
DC7-23V:
Power input of iCanView222.
Rev.1.0 (Mar. 2008)
11
