Instructions Manual
8
The middle four numbers represent cycle number.
The last two numbers represent error code.
E.g. 00:no error;01: error E01
5.8 Printer (Optional)
If installed you can see the Icon in the screen stop flashing (see Installation), at the end of each cycle
The printer (Optional) will produce a report of the cycle that just ended. t the end of each cycle the
printer will print out a report of the cycle.
5.9 Report
Internal Memory
In this menu you can read the latest information of the last 20 cycles stored in the internal
memory of the sterilizer.
5.9.1 Select “Report” from the main menu and Tap
button, you will see the list of records.
5.9.2 Select the record by Taping
button.
5.9.3 Tap
button.
Then the record is printed(if the optional printer has been connected) the report or/and is
saved in the USB drive (optional).
Note: It can save in the internal memory only the reports of the last 20 cycles.
Note: The storage system is based on the principle of “first In-first-\out”.
Tap
button to exit.
When vising printed data records, refer to the diagram below:
Program
Basic Set
Report
00012
00013
00014
00015
Summary of Contents for STE-23-D
Page 1: ...STEAM STERILIZERS Instructions Manual For Model STE 23 D...
Page 2: ......
