IC Realtime DVR704MSGV5 User Manual Download

Page: 97 / 144

local activation alarm occurs.

Image size

It is the same with the resolution of the main stream.

Quality

It is to set the image quality. There are six levels.

Interval

It is to set snapshot frequency.

Copy

Click it; you can copy current channel setup to other channel(s).

5.9.1.2.3 Overlay

The video overlay interface is shown as in Figure 5-20.

Figure 5-20

Please refer to the following sheet for detailed information.

Parameter

Function

Cover-area

(Privacy mask)

Check Preview or Monitor first.

Click Set button, you can privacy mask the specified video in the
preview or monitor video.

System max supports 4 privacy mask zones.

Time Title

You can enable this function so that system overlays time
information in video window.

You can use the mouse to drag the time title position.

You can view time title on the live video of the WEB or the
playback video.

Channel Title

You can enable this function so that system overlays channel
information in video window.

You can use the mouse to drag the channel title position.

You can view channel title on the live video of the WEB or the
playback video.

GPS Overlay

Overlay GPS information such as (speed, longitude, latitude) on
the video.

Summary of Contents for DVR704MSGV5

















































































































































Search results

Summary of Contents for DVR704MSGV5

Reviews:

Related manuals for DVR704MSGV5

Brands by name

Popular brands

IC Realtime DVR704MSGV5, User Manual

Search results

Summary of Contents for DVR704MSGV5

Reviews:

Related manuals for DVR704MSGV5

Brands by name

Popular brands