IC Bus Gasoline CE Series, Operation And Maintenance Manual

Page: 37 / 241

Instrumentation
9
Illuminates YELLOW when the
transmission is not engaged in the
selected gear. The warning indicator
goes out when the gearshift lever is
adjusted to the appropriate gear. Refer
to the
Transmission Operation Manual
for more information.
10
Illuminates YELLOW when the optional
lift door is not securely closed when the
key switch is in the ON position.
11
Illuminates YELLOW when the traction
control system is turned off. It also
illuminates momentarily when the
traction control system is on and is
limiting wheel spin. Blinks on if slippery
road conditions may exist. If this
happens, adjust your driving accordingly.
Refer to the
Driving section for more
information.
12
Flashes GREEN when the left turn signal
or the hazard lights are turned on.
13 Not Used
14 Not Used
15
MIL-The Malfunction Indicator Lamp
(MIL) illuminates when the On-Board
Diagnostics (OBD) detects a malfunction
related to the emissions control system.
The illuminated MIL indicates that the
vehicle needs to be serviced at the
first convenient opportunity. Lamp may
remain active after repair until system
operation confirms repair.
16
Illuminates RED when a parking brake
system malfunction has been detected.
If the Service Parking Brake indicator
stays illuminated, have the system
serviced immediately.
17
Optional indicator illuminates RED
immediately after ignition is turned on to
remind operator to fasten seat belt. This
applies to only the driver’s seat.
Optional Seat Belt Reminder with Seat
Belt Monitoring causes initial visual
indication, then flashes with audible
alarm when ignition is on, parking brake
is released, and seat belt is not fastened.
18
Illuminates RED when the brake fluid
falls below the safe operating level.
19
Illuminates when the RED flasher
warning lights are activated.
23