IC Bus Gasoline CE Series, Operation And Maintenance Manual, Page: 214 / 241

Maintenance Intervals
Lubrication and Maintenance Interval: Bus — Gasoline CE Bus (cont.)
System Item Intervals
Special Interval (3) : miles (km) /
hours / months
Rear Axle With Petroleum Oil – Change 60,000 (96,000) / – / 12
Rear Axle Wheel Ends – Inspect for leaks, lube level
/ condition, and check end play with dial indicator.
100,000 (160,000) / – / 12 Also at
brake lining service
If wheel end play is found to be outside the
0.001 in. to 0.005 in. specification, or lube
condition is contaminated or low, then perform
a full wheel end tear down. Inspect bearings,
spindle, and spindle nuts for excessive
wear and replace as necessary.
Rear Axle With Synthetic Oil – Change
Dana ® Spicer ® :180,000 ( 288,000) / – / 36
Meritor: 250,000 (400,000) / - / 36
Rear Axle (Cont.)
Rear Axle Wheel Ends – Full tear down inspection of
all wheel end components, regardless of condition
of lube and wheel bearing end play.
500,000 (800,000 km) / – / 60 months
Air Pressure – Check A, B
Spin Balance At time of tire mounting
Wear and Condition – Check A, B
Tires / Wheels
Wheel Stud Nuts – Retorque A, B
200