IBT IP300, User Manual

Page: 24 / 26

INSTALLATIONS
20 IP300 User’s Manual
J25: RJ45 Connector for LAN1
J25 is the RJ-45 connector on board for LAN1. The figure below shows
the pin out assignments of the connector and its corresponding input jack.
Active LED
Link LED
RJ-45
TD+(pin#1)
TD-(pin#2)
RD+(pin#3)
RD-(pin#6)
J26: PS/2 Keyboard and Mouse Connector
J26 uses a Y-cable with dual D-connectors for a PS/2 keyboard and a
PS/2 mouse.
Pin # Signal Name
1 Mouse data
2 Keyboard data
3 Ground
4 Vcc
5 Mouse Clock
6 Keyboard Clock
J27: VGA CRT Connector
The pin assignments of the J27 VGA CRT connector are as follows:
Signal Name Pin Pin Signal Name
Red 1 2 Green
Blue 3 4 DDCK
GND 5 6 GND
GND 7 8 GND
Vcc 9 10 GND
N.C. 11 12 DDDA
HSYNC 13 14 VSYNC
NC 15