IBT IP300, User Manual

Page: 21 / 26

INSTALLATIONS
IP300 User’s Manual 17
Power Switch: Pins 9 and 10
When the power is set as ATX mode, this connector becomes
the power button. In AT mode, this connector has no
function.
Pin # Signal Name
9 Ground
10 PW ON
J13: PCI Cardbus Connector
J14: Compact Flash Connector
J14 is the Compact Flash connector that is used in conjunction with the
IDE2 (J29) connector. If the CompactFlash connector and IDE2 are to be
used simultaneously, you have to set JP2 to configure J14 as either
Master or Slave.
J15: CD-In Audio Connector
Pin # Signal Name
1 CD Audio L
2 Ground
3 Ground
4 CD Audio R
J16: Audio Connector
J16, a 12-pin header connector, supports an optional external connector
supporting 3 sockets for Line Out, Line In and Mic functions. The
following table shows the pin assignments of this connector.
Signal Name Pin # Pin # Signal Name
Line Out R 1 2 Line Out L
Ground 3 4 Ground
Line In R 5 6 Line In L
Ground 7 8 Ground
Mic 9 10 BIAS
Ground 11 12 NC