IBT IP300, User Manual

Page: 20 / 26

INSTALLATIONS
16 IP300 User’s Manual
J10: System Function Connector
J10 provides connectors for system indicators that provide light
indication of the computer activities and switches to change the computer
status. It provides interfaces for the following functions.
Hard Disk Drive LED Connector: Pins 1 and 2
This connector connects to the hard drive activity LED on
control panel. This LED will flash when the HDD is being
accessed.
Pin # Signal Name
1 HDD Active
2 5V
Power LED: Pins 3 and 4
The power LED indicates the status of the main power
switch.
Pin # Signal Name
3 Ground
4 Power LED
SMI/Hardware Switch: Pins 5 and 6
This connector supports the "Green Switch" on the control
panel, which, when pressed, will force the system into the
power-saving mode immediately.
Pin # Signal Name
5 Ground
6 Sleep
Reset: Pins 7 and 8
This connector connects to the reset switch button of the
system.
Pin # Signal Name
7 Ground
8 Reset