IBM ZVM - FOR LINUX V6 RELEASE 1, Getting Started

Page: 50 / 172

attach 202 *
DASD 0202 ATTACHED TO MAINT 0202 WITH DEVCTL
Ready;
2.
Start CPFMTXA:
cpfmtxa 202
3.
Type in these responses and press the Enter key in response to each prompt:
ENTER FORMAT, ALLOCATE, LABEL, OR QUIT:
format
ENTER THE CYLINDER RANGE TO BE FORMATTED ON DISK 0202 OR QUIT:
000 end
ENTER THE VOLUME LABEL FOR DISK 0202:
label
FORMAT WILL ERASE CYLINDERS 00000-00544 ON DISK 0202
DO YOU WANT TO CONTINUE? (YES|NO)
yes
.
.
.
ENTER INPUT COMMAND:
end
ICK00002I ICKDSF PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 0
ENTER ALLOCATION DATA
.
.
.
where label is a volume label (for instance, PAG002 for a paging volume,
SPL002 for a spooling volume, or USR002 for a user volume).
4.
In response to the “ENTER ALLOCATION DATA” prompt, type one of these
responses and press the Enter key:
v
If you are creating a paging volume:
page 0 end
end
v
If you are creating a spooling volume:
spol 0 end
end
v
If you are creating a user volume:
perm 0 end
end
Result: You see more messages from the program. Finally, you see this:
ICK00002I ICKDSF PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 0
5.
Detach the volume.
detach 202
DASD 0202 DETACHED
Ready;
6.
Repeat these steps for other paging, spooling, and user volumes you need.
36
z/VM: Getting Started with Linux on System z