IBM xSeries 330, Hardware Maintenance Manual

Page: 12 / 158

4
Hardware Maintenance Manual: xSeries 330
Features and specifications
The following table provides a summary of the features and specifications for the
xSeries 330 server.
What the xSeries 330 offers
The unique design of this server takes advantage of advancements in symmetric
multiprocessing (SMP), data storage, and memory management. The server
combines:
Table 1. Features and Specifications.
Microprocessor:
• Intel
®
Pentium
®
III
microprocessor with MMX™
technology and SIMD
extensions
• 256 KB Level-2 cache
• Supports up to two
microprocessors
Memory:
• Standard: 256 MB
• Maximum: 4 GB
• Type: 133 MHz, ECC, SDRAM,
Registered DIMMs
• Slots: 4 dual inline
Drives standard:
• Diskette: 1.44 MB
• CD-ROM: 24X IDE
Expansion bays:
• Two 3.5-inch slim high bays for
LVD SCSI hard disk drives
PCI expansion slots:
• Two 33 MHz/64-bit
Power supply:
One 200 watt (115-230 Vac)
Video:
• S3 Savage4 PRO
Graphics/Video Accelerator
(integrated on system board)
• Compatible with SVGA
• 8 MB SDRAM video memory
Size
• Height 43.69 mm (1.72")
• Depth: 653.29 mm (25.72")
• Width: 439.93 mm (17.32")
• Weight: approximately 12.7 kg
(28lb) when fully configured
Integrated functions:
• Advanced System Management
processor
• One Ultra160 SCSI controller
• Two 10BASE-T/100BASE-TX
Intel Ethernet controllers
• Two Universal Serial Bus (USB)
ports
• Two RS-485 Advanced System
Management processor ports
(one In, one Out)
• One serial port
• Two Cable Chaining Technology
ports (IN, OUT)
Acoustical noise emissions:
• Sound power, idling: 6.1 bel
maximum
• Sound power, operating: 6.2 bel
maximum
Environment:
• Air temperature:
— Server on: 10º to 35º C (50.0º to
95.0º F). Altitude: 0 to 914 m
(2998.7 ft.)
— Server on: 10º to 32º C (50.0º to
89.6º F). Altitude: 914 m
(2998.7 ft.) to 2133 m (6998.0 ft.)
— Server off: 10º to 43º C (50.0º to
109.4º F). Maximum altitude:
2133 m (6998.0 ft.)
• Humidity:
— Server on: 8% to 80%
— Server off: 8% to 80%
Heat output:
Approximate heat output in British
Thermal Units (BTU) per hour
• Minimum configuration: 273 BTU
(80 watts)
• Maximum configuration: 751 BTU
(220 watts)
Electrical input:
• Sine-wave input (50-60 Hz)
required
• Input voltage low range:
— Minimum: 100 V ac
— Maximum: 127 V ac
• Input voltage high range:
— Minimum: 200 V ac
— Maximum: 240 V ac
• Input kilovolt-amperes (kVA)
approximately:
— Minimum: 0.08 kVA
— Maximum: 0.22 kVA