IBM VIAVOICE 10-ADVANCED EDITION, User Manual

Page: 78 / 126

To access the All Commands view, say
"How Do I Say"
. Typically, you would
say this when What Can I Say is not the active program (the program you are
now using).
From What Can I Say, say "Return to program" to switch to the previous
program.
Creating notes for What Can I Say
You can create your own notes for
each view. The notes are saved when
you close What Can I Say.
When you write notes in a view, the
notes are associated only with the
program that had focus when you
wrote the notes. Should you switch to
another program, you will see only
the notes that you wrote for that other
view.
Printing the commands in a view
To print a list of commands, select
Action > Print
.
The print function prints only what is expanded. So, expand all before you
print.
Using an Attention word with commands
If you find that ViaVoice does not recognize your commands, you can begin
every command with an Attention word. The Attention word signals to
ViaVoice that you are about to say a command. The default Attention word is
'Computer', but you can specify other Attention words at the
Command Sets
tab in ViaVoice Options.
To require the Attention word to be spoken before commands, go to the
Dictation tab in ViaVoice Options and make sure the Required check box is
ticked. (See “Setting dictation options” on page 80.) When the Attention word
is specified as "required", you must say it as the first word before every
command, even commands like
"Microphone off" .
When using the Attention word, do not pause between it and the rest of the
command.
68
ViaVoice for Windows Personal Edition