IBM Ultra320, Installation And Using Manual

Page: 30 / 54

5. To load the module, type:
modprobe ipr
Press Enter.
Note: If you are running a RHEL 3 based distribution, add the
modprobe ipr
line to the
/etc/rc.d/rc.local
file to ensure the driver is loaded at boot time.
Installing the Utility Software
If you downloaded the iprutils utility package, do the following:
1. Turn on the power to your system unit.
2. At the system prompt, log in as root user.
3. Install the following packages (if not already installed):
gcc
ncurses-devel
pciutils-devel
glibc-devel
4. Rebuild the rpm package by typing:
rpmbuild –-rebuild –-target ppc iprutils-2.0.10-1.src.rpm
Press Enter.
5. Install the compiled rpm package by typing:
rpm -Uvh iprutils-2.0.10-1.ppc.rpm
6. Restart the iprutils services by typing:
/etc/init.d/iprupdate restart
/etc/init.d/iprdump restart
7. If running a 2.6 kernel, restart the iprinit service by typing:
/etc/init.d/iprinit restart
Verifying Hardware Installation
To verify that your system unit recognizes the PCI-X Dual Channel Ultra320 SCSI RAID Adapter, do the
following:
1. If necessary, log in as root user.
2. Type:
iprconfig
Press Enter.
3. Select the Display hardware status option and press Enter.
If the PCI-X Dual Channel Ultra320 SCSI RAID Adapter installed correctly, data displays for the adapter
and each disk attached to it. The following is an example of the data that displays on your screen:
18
PCI-X Dual Channel Ultra320 SCSI RAID Adapter: Installation and Using Guide