IBM TURBOWAYS 25, Hardware Installation Manual

Page: 25 / 44

Chapter 4. Instructions to Complete
Installation
This chapter contains instructions to complete the installation of the
adapter. It also contains information on how to obtain assistance
and service for your adapter.
To complete the hardware and software installations of the
TURBOWAYS 25 Adapter, choose one of the following options:
¹
Access the CD-ROM: See “Accessing the CD-ROM” on
page 4-3.
¹
If you do not have a CD-ROM drive installed on your machine
but have access to one: See “Accessing the CD-ROM” on
page 4-3.
¹
If you do not have access to a CD-ROM drive, use the Internet,
the IBM FTP server, or the IBM Bulletin Board System to obtain
device driver diskettes images and documentation: See
“Obtaining Information from Sources Other Than the CD-ROM”
on page 4-3.
Contents of the CD-ROM
The CD-ROM contains the STARTCD program, device driver code,
ATMAID code, and supporting documentation. From the CD-ROM
you can access required device driver diskette images to install your
software and view (or print) supporting online documentation. The
CD-ROM includes viewable BookManager files and printable
PostScript and ASCII files.
The README.1ST Files
The STARTCD program helps you create the diskettes needed for
your operating system. Before configuring the adapter and installing
the device drivers for the TURBOWAYS 25 Adapter, consult the
README.1ST files in the root directories of your TURBOWAYS 25
diskettes:

Copyright IBM Corp. 1996
4-1