IBM TURBOWAYS 25, Hardware Installation Manual, Page: 17 / 44

Along with this manual, the TURBOWAYS 25 Adapter kit consists of
the following items:
¹
IBM TURBOWAYS 25 ATM PCI Adapter
¹
TURBOWAYS 25 CD-ROM for ISA and PCI Adapters which
contains:
– The STARTCD program used for navigating through the
CD-ROM
– Device Driver Code
– ATMAID code
– Online TURBOWAYS 25 TURBOWAYS 25 ATM PCI
Adapter Installation and Testing Instructions (viewable and
printable)
¹
Safety Information manual
If any item is missing or damaged, contact your place of purchase.
Collecting the Materials and Information That You
Need
In addition to the TURBOWAYS 25 Adapter kit, you will need other
materials and information to install the adapter and the drivers that
are required for communication with the adapter. The following
sections describe the materials you need and the prerequisites you
need to meet. Ensure that you have everything you need before you
begin the installation procedures.
Hardware Prerequisites
To install the adapter, you need to meet certain hardware
prerequisites. You need:
¹
A PCI bus personal computer equipped with a 486 or higher
processor.
¹
An available 32-bit, PCI expansion slot with bus master capability
¹
8 MB to 32 MB of memory, depending on your operating system.
¹
A 3.5-inch, 1.44-MB diskette drive or a CD-ROM drive.
¹
A VGA or better monitor.
Chapter 2. Preparing to Install the Adapter
2-3