IBM Turboways 155, Installation And User Manual

Page: 18 / 36

Ÿ
Connection Type
Press F4 and select one of the following types:
svc_s Switched Virtual Channel (SVC) ARP Server
svc_c SVC ATM Client
pvc SVCs disabled (only permanent virtual channels (PVCs) are used)
Ÿ
ATM Server Address
– For client connections svc_c, type the 20-byte hexadecimal ARP server
ATM address for your system unit and press Enter. (For example,
39.99.99.99.99.99.99.ðð.ðð.99.99.ð2.ð2.ð ð.ðð.8d.44.a3.ð2.ð3)
.
- To obtain your ATM server address, type the following on the ARP
server machine at the command prompt and press Enter.
arp -t atm -a
– For server connections svc_s, no address is required. Leave this field
blank.
Ÿ
Alternate Devices
– Data not required; leave field blank.
Ÿ
Idle Timer
– Data not required; leave field blank.
Ÿ
ACTIVATE the Interface after Creating it?
– To activate the interface, select the default, yes.
7. When the Command status in the Command Status screen changes from
running
to
OK
, press F10 to exit SMITTY.
To set the hostname, a nameserver, or a gateway; continue with the next section.
To use permanent virtual channels (PVCs), go to “Configuring PVCs” on page 3-3.
3-2
Installation and User's Guide