IBM TS2290 Manual Download Page 53

Page: 53 / 157

Supply Item

Methods of Ordering

Specify the VOLSER characters that you want.

20-PACK IBM LTO Ultrium 8 12 TB Data Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 652.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

5-PACK IBM LTO Ultrium 8 12 TB Data Cartridge
(black and white labels unattached)

Order as part number 01PL340 through an IBM-authorized distributor, or online at:

http://www-

1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 8 12 TB WORM Tape Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 572.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 8 12 TB WORM Tape Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 672.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Type M (M8) 9 TB Data Cartridge

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 452. Specify the VOLSER characters that you want.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto.

20-PACK IBM LTO Ultrium 7 6 TB Data Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 551.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 7 6 TB Data Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 651.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

5-PACK IBM LTO Ultrium 7 6 TB Data Cartridge
(black and white labels unattached)

Order as part number 38L7189 through an IBM-authorized distributor, or online at:

http://www-

1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 7 6 TB WORM Tape Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 571.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 7 6 TB WORM Tape Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 671.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 6 2.5 TB Data Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 550.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 6 2.5 TB Data Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 650.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

5-PACK IBM LTO Ultrium 6 2.5 TB Data Cartridge
(black and white labels unattached)

Order as part number 35P1902 through an IBM-authorized distributor, or online at:

http://www-

1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 6 2.5 TB WORM Tape Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 570.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 6 2.5 TB WORM Tape Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 670.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 5 1.5 TB Data Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 014.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 5 1.5 TB Data Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 015.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

5-PACK IBM LTO Ultrium 5 1.5 TB Data Cartridge
(black and white labels unattached)

Order as part number 46C2084 through an IBM-authorized distributor, or online at:

http://www-

1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 5 1.5 TB WORM Tape Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 034.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 5 1.5 TB WORM Tape Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 035.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 4 800 GB Data Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or any authorized IBM Business Partner by specifying
Machine Type 3589 Model 010.

You can also order through an IBM-authorized distributor, or online at:

http://www-1.ibm.com/storage/tape/lto

IBM TS22xx - TS2290, TS2280, and TS2270

Summary of Contents for TS2290






























































































































































Search results

Summary of Contents for TS2290

Reviews:

Related manuals for TS2290

Brands by name

Popular brands

IBM TS2290, Manual

Search results

Summary of Contents for TS2290

Reviews:

Related manuals for TS2290

Brands by name

Popular brands