![background image](http://html.mh-extra.com/html/ibm/totalstorage-ds5100/totalstorage-ds5100_installation-users-and-maintenance-manual_609021087.webp)
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v
Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
v
Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
1. Read the information in “Handling fibre-optic cables” on page 48.
2. If necessary, remove the protective cap from the SFP module, as shown in
Figure 26. Save the protective cap for future use.
3. Remove the two protective caps from one end of the LC-LC cable, as shown in
Figure 26. Save the protective caps for future use.
4. Carefully insert this end of the LC-LC cable into an SFP module that is installed
in the DS5100 and DS5300. The cable connector is keyed to ensure it is
inserted into the SFP module correctly. Holding the connector, push in the cable
until it clicks into place, as shown in Figure 27 on page 56.
Protective cap
Fiber-optic
cable
F10ug011
Figure 26. Removing fiber-optic cable protective caps
Chapter 3. Cabling the storage subsystem
55