IBM TotalStorage DS4400, User Manual

Page: 78 / 124

Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the
following label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts
inside these components. If you suspect a problem with one of these
parts, contact a service technician.
2. Remove the DS4400 Storage Server bezel, as shown in Figure 21 on page 23.
Attention: Be careful when removing the battery. The battery weighs
approximately 6.4 kg (14 lb.).
3. Using Figure 36 on page 47 as a guide, remove the battery.
a. Loosen the four captive screws on the battery. If necessary, use a flat
blade screwdriver to loosen the screws.
b. Using both pull handles, slide out the battery about 5 cm (2 in.).
c. Using both hands, grasp the sides of the battery and pull out.
Captive screws
Pull handle
46
IBM TotalStorage DS4400 Fibre Channel Storage Server: User’s Guide