IBM TotalStorage DS4400, User Manual

Page: 45 / 124

For more information about connecting to these devices, see the documentation
that comes with the device.
Removing an LC-LC cable from an LC-SC cable adapter
To remove an LC-LC cable from an LC-SC cable adapter, do the following:
Attention: To avoid damaging the LC-LC cable, make sure you press and hold
the lever to release the latches while you remove the cable from an LC-SC cable
adapter. Ensure that both levers on the LC-LC cable are in the released position
when removing the cable.
1. On the end of the cable that connects into the LC connector end of the LC-SC
cable adapter, press down and hold the lever to release the latches. Figure 15
shows the location of the lever and latches.
Lever
Latches
2. Carefully pull on the connector to remove it. Make sure you grasp the connector
and not the cable when removing the LC-LC cable from the LC-SC cable
adapter, as shown in Figure 16.
3. Replace the protective caps on the cable ends.
Figure 15. LC-LS Fibre Channel Cable lever and latches
Figure 16. Removing the LC-LC Fibre Channel cable from an LC-SC Fibre Channel cable
adapter
Chapter 1. Introduction
13