IBM TotalStorage DS4100, Installation, User'S, And Maintenance Manual

Page: 38 / 180

Your DS4100 storage server has 14 hard disk drive slots; any drive slots not
containing hard disk drives will contain blank drive trays. Each of the 14 drive
slots must always contain either a blank tray or a hard disk drive.
– Box ID labels (used to label the storage server IDs on the front of the
DS4100)
– Wrap plug and coupler kit
Attention: The DS4100 does not ship with region-specific power cords. You
must obtain the IBM-approved power cords for your region. See Appendix C,
“Power cords,” on page 125 for the IBM-approved power cords for your region.
v
Software and documentation
– DS4000 Storage Manager Version 9.10 Support CD, including client software
and firmware, and online help and publications in Adobe Acrobat Portable
Document Format (PDF)
For a list of available IBM DS4000 publications, see “DS4000 Storage Server
publications” on page xx.
– IBM TotalStorage DS4100 Storage Server Installation, User’s, and
Maintenance Guide
– IBM TotalStorage DS4100 Fibre Channel Cabling Instructions
– IBM Safety Information
– IBM TotalStorage Storage Server and Expansion Unit Quick Start Guide
– IBM License Agreement
– Statement of Limited Warranty
If an item is missing or damaged, contact your IBM reseller or your IBM marketing
representative.
If you have not already done so, record your storage server serial number in the
table in Appendix A, “Records,” on page 119. The serial number is located on a
label at the rear of the DS4100. The machine and model number are found on the
product information label above the serial number.
A rack mounting template and instructions for installing the support rails and the
storage server are provided in this document in Chapter 2, “Installing the storage
server,” on page 17.
To connect your DS4100 to other devices, use the following options:
v IBM SFP module
v
IBM LC-LC fibre-channel cable
v
IBM LC-SC fibre-channel cable (for host-side connections only)
Note: You must order these options separately.
Best practices guidelines
To ensure optimal operation of your system, always follow these best practices
guidelines:
v
Back up the data on your storage drives periodically.
v DS4100 base storage server only: To maintain power redundancy, plug the
DS4100 storage server’s right and the left power supplies into two independent
external power circuits through ac distribution units inside a rack cabinet or
directly into external receptacles. Similarly, the right and left power supplies of
6
IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide