Installing IBM OS/2 Software
Installing the ThinkPad Display Device Driver for OS/2
Note:
When installing an operating system,
you need to install the ThinkPad
display device driver.
The display device driver enables you to use various screen
resolutions and colors for the LCD and external monitor. It also
takes advantage of the computer's video capability.
To install the ThinkPad display device driver:
1. Start OS/2.
2. Insert the Video Featres Diskette for OS/2 into the diskette drive
and open the OS/2 full screen or OS/2 window.
3. Go to the A: prompt; then type
SET UP X
(
X
=boot drive) and press
Enter.
4. Select Primary Display on the display driver install panel and
click on OK.
5. Select NeoMagic...MAGICGRAPH128Z/ZV on the primary
display driver list panel and click on OK.
6. Make sure the source directory is A:\ and click on Install.
7. Follow the instructions on the screen.
8. After the installation is complete, remove the diskette, shut down
OS/2, and restart the computer.
118
IBM ThinkPad 380 or 380D User's Guide
Summary of Contents for ThinkPad 380
