manualshive.com logo in svg

IBM ThinkPad 310E, User Manual

The IBM ThinkPad 310E, a reliable and efficient laptop, offers unmatched performance. Enhance your user experience with our comprehensive User Manual, providing step-by-step instructions and troubleshooting tips. Download this manual for free from our website manualshive.com, to ensure optimal usage and maximize productivity.

Share
Download
background image

Monitoring the Battery-Power Status

Chapter 4.  Using Battery Power          

4-7

Monitoring the Battery-Power Status

The battery condition can be determined through the battery-power
status indicator and the Fuel-Gauge icon.

Using the Battery-Power Status Indicator

The battery-power status indicator shows the current status of the
battery pack.  Observe the battery-power status indicator and
compare it with the following status list to determine the battery
condition:

Status

Condition

Action Required

Green

Fully charged or
partially discharged

Continue your work.

Blinking
Orange

Approximately 5
minutes of power
left.  The orange
indicator blinks until
power fails or this
low-battery condition
is remedied.

Take either of the following actions
within 1 minute:

•

 Connect the AC Adapter to the

computer.

•

 Replace the battery pack with a

fully charged spare.

Off

The battery pack is
not installed, the
computer is turned
off, or the computer
is in hibernation
mode.

If standby mode is caused by a low-
battery condition, data in memory can
be lost.  Do either of the following
immediately.

•

 To continue your work with the

AC Adapter: connect the AC
Adapter to the computer and
press the Fn key.

•

 To continue your work with a fully

charged battery pack: connect the
AC Adapter to the computer,
replace the battery pack with a
fully charged one.  Then
disconnect the AC Adapter from
the computer.

Summary of Contents for ThinkPad 310E








































































































































































































Reviews:

No comments

Related manuals for ThinkPad 310E

Acer Aspire 5335 Series Service Manual preview
Aspire 5335 Series
Brand: Acer Pages: 154
Acer Aspire 1420P Series Service Manual preview
Aspire 1420P Series
Brand: Acer Pages: 216
Gateway LT 1000 Reference Manual preview
LT 1000
Brand: Gateway Pages: 102
IBM CL57 Manual preview
CL57
Brand: IBM Pages: 33
Hena CW14Q7B User Manual preview
CW14Q7B
Brand: Hena Pages: 7
ECS T30II Manual preview
T30II
Brand: ECS Pages: 98
Wanlida PC-88001 User Manual preview
PC-88001
Brand: Wanlida Pages: 33
Lenovo 21BX0013US User Manual preview
21BX0013US
Brand: Lenovo Pages: 56
Lenovo 21BX001LGE Hardware Maintenance Manual preview
21BX001LGE
Brand: Lenovo Pages: 96
Lenovo 21DH000QGE Instructions Manual preview
21DH000QGE
Brand: Lenovo Pages: 12
Lenovo 2516ADU Brochure preview
2516ADU
Brand: Lenovo Pages: 4
Lenovo 20WJ001HGE Hardware Maintenance Manual preview
20WJ001HGE
Brand: Lenovo Pages: 64
Lenovo 27384FU Hardware Maintenance Manual preview
27384FU
Brand: Lenovo Pages: 154
Lenovo 27434AU Hardware Maintenance Manual preview
27434AU
Brand: Lenovo Pages: 240
Lenovo 266872U Brochure preview
266872U
Brand: Lenovo Pages: 4
Dell Inspiron 3520 Service Manual preview
Inspiron 3520
Brand: Dell Pages: 124
Bluewave LB141 Quick Start Manual preview
LB141
Brand: Bluewave Pages: 11
Lenovo Yoga Slim 7i Pro User Manual preview
Yoga Slim 7i Pro
Brand: Lenovo Pages: 36

Brands by name

Popular brands

Load more brands