IBM ThinkPad 310E User Manual Download Page 116

Page: 116 / 199

Installing Software for DOS

7-8

IBM ThinkPad 310E/310ED: User’s Guide

Installing the Audio Device Driver for DOS

To install the audio device driver:

Insert the Audio Driver Diskette for DOS/Windows 3.11 into the
diskette drive.

Type A: and press Enter.

Type INSTALL -D and press Enter.

Follow the instructions on the screen to complete the
installation.

Installing the PC Card Driver for DOS

Note:
After installing the PC Card program,
you may need to install drivers that
come with your PC Card before you
can use the PC Card.

You must install the PC Card driver before you can use PC Cards.
To install the PC Card driver, do the following:

Insert the PC Card Program Diskette for DOS into the diskette
drive.

Type A: and press Enter.

Type INSTALL and press Enter.

Summary of Contents for ThinkPad 310E








































































































































































































Search results

Summary of Contents for ThinkPad 310E

Reviews:

Related manuals for ThinkPad 310E

Brands by name

Popular brands

IBM ThinkPad 310E, User Manual

Search results

Summary of Contents for ThinkPad 310E

Reviews:

Related manuals for ThinkPad 310E

Brands by name

Popular brands