manualshive.com logo in svg

IBM ThinkPad 310E, User Manual

Share
Download
IBM ThinkPad 310E User Manual Download Page 191

Notices

E-4

IBM ThinkPad 310E/310ED:  User’s Guide

Notices

References in this publication to IBM products, programs, or
services do not imply that IBM intends to make these available in all
countries in which IBM operates.  Any reference to an IBM product,
program, or service is not intended to state or imply that only IBM’s
product, program, or service may be used.  Any functionally
equivalent product, program, or service that does not infringe any of
IBM’s intellectual property rights may be used instead of the IBM
product, program, or service.  Evaluation and verification of
operation in conjunction with other products, except those expressly
designated by IBM, are the user’s responsibility.

IBM may have patents or pending patent applications covering
subject matter in this document.  The furnishing of this document
does not give you any license to these patents.  You can send
license inquiries, in writing, to:

IBM Director of Licensing
IBM Corporation
500 Columbus Avenue
Thornwood, NY 10594
U.S.A.

Trademarks

The following terms are trademarks of the IBM Corporation in the
United States or other countries or both:

AT
HelpWare

IBM
PS/2

ThinkPad
TrackPoint III

Windows is a trademark of Microsoft Corporation.

Other company, product, and service names, which may be denoted
by a double asterisk (**), may be trademarks or service marks of
others.

Summary of Contents for ThinkPad 310E








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands