IBM System x3250 M4 Installation & User Manual Download Page 56

Page: 56 / 108

Release tab

5. Touch the static-protective package that contains the new DVD drive to any

unpainted metal surface on the server; then, remove the DVD drive from the
package and place it on a static-protective surface.

6. Follow the instructions that come with the DVD drive to set any jumpers or

switches.

7. Remove the retention clip from the DVD drive filler.

8. Attach the drive retention clip (that comes with the DVD drive filler) to the side

of the new DVD drive.

Alignment pins

Drive retention clip

9. Align the drive in the drive bay and slide the drive into the DVD drive bay until

the drive clicks into place.

IBM System x3250 M4 Type 2583: Installation and User’s Guide

Summary of Contents for System x3250 M4













































































































Search results

Summary of Contents for System x3250 M4

Reviews:

Related manuals for System x3250 M4

Brands by name

Popular brands

IBM System x3250 M4, Installation & User Manual

Search results

Summary of Contents for System x3250 M4

Reviews:

Related manuals for System x3250 M4

Brands by name

Popular brands