IBM System x3250 M4, Installation & User Manual

Page: 37 / 108

Model with redundant power supply:
Cover
PCI riser card
assembly
-
ServeRAID BR10il
v2 adapter some
models
-
(
)
Air baffle
DIMM
Chassis
2.5-inch simple-
swap hard disk
drive backplate
(some models)
2.5-inch hot-swap
hard disk drive filler
Front bezel
Operator information
panel assembly
DVD drive
Fans
System board
Microprocessor
Heat sink
2.5-inch hot-swap
hard disk drive
backplane
(some models)
2.5-inch hot-swap
hard disk drive
(some models)
2.5-inch hard
disk drive filler
2.5-inch simple-
swap hard disk
drive(some
models)
DVD drive filler
Hot-swap
power supply
Safety 240VA cover
Paddle card
Blue on a component indicates touch points, where you can grip the component to
remove it from or install it in the server, open or close a latch, and so on.
Orange on a component or an orange label on or near a component indicates that
the component can be hot-swapped, which means that if the server and operating
system support hot-swap capability, you can remove or install the component while
the server is running. Orange can also indicate touch points on hot-swap
components. See the instructions for removing or installing a specific hot-swap
component for any additional procedures that you might have to perform before you
remove or install the component.
Chapter 2. Installing optional devices
19