IBM System x3250 M4, Installation & User Manual

Page: 73 / 108

Important: If the system-error LED on the front of the server is lit but there are
no other error indications, clear the system-event log. Also, after you complete a
repair or correct an error, clear the system-event log to turn off the system-error
LED on the front of the server.
– POST Event Viewer
Select this choice to enter the POST event viewer to view the POST event
log.
– System Event Log
Select this choice to view the system-event log.
– Clear System Event Log
Select this choice to clear the system-event log.
v
User Security
Select this choice to set or clear passwords. See “Passwords” on page 56 for
more information.
This choice is on the full and limited Setup utility menu.
– Set Power-on Password
Select this choice to set the power-on password. See “Power-on password”
on page 56 for more information.
– Clear Power-on Password
Select this choice to clear the power-on password. See “Power-on password”
on page 56 for more information.
– Set Administrator Password
Select this choice to set an administrator password. An administrator
password is intended to be used by a system administrator; it limits access to
the full Setup utility menu. If an administrator password is set, the full Setup
utility menu is available only if you type the administrator password at the
password prompt. For more information, see “Administrator password” on
page 57.
– Clear Administrator Password
Select this choice to clear an administrator password. For more information,
see “Administrator password” on page 57.
v Save Settings
Select this choice to save the changes that you have made in the settings.
v Restore Settings
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
v
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
v
Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.
Chapter 3. Configuring the server
55