IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 80 / 257

4-2
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Using the Operator Panel
Figure 4-1 shows the top level menu tree structure of the Operator Panel on the front
of the TS2900 Tape Autoloader. For details on how to select commands and options,
see the description in “Operator Panel” on page 2-1.
Figure 4-1. Operator Panel top level menus
Web User Interface Monitoring the Library “Viewing the System Summary” on page 4-15
“Viewing the Library Map” on page 4-16
Managing the Library “Moving Cartridges” on page 4-17
“Unloading the Drive” on page 4-18
“Cleaning the Drive Manually” on page 4-18
“Taking the Library Online/Offline” on page 4-19
“Conducting a Library Inventory” on page 4-19
Configuring the Library “Managing User Access” on page 4-20
“Configuring Physical Library Settings” on page 4-21
“Configuring Logical Library Settings” on page 4-21
“Configuring Network Settings” on page 4-22
“Configuring Encryption Settings” on page 4-23
“Configuring Date and Time Settings” on page 4-25
“Configuring E-mail Notifications” on page 4-26
“Configuring SNMP Trap Notifications” on page 4-27
“Saving and Restoring Configuration Settings” on page 4-28
Servicing the Library “Running Encryption Key Path Diagnostics” on page 4-30
“Viewing Operator Interventions” on page 4-30
“Viewing Library Logs” on page 4-31
“Viewing Trace Data” on page 4-32
“Downloading Drive Logs” on page 4-33
“Downloading Library Logs” on page 4-33
“Resetting the Library/Drive” on page 4-33
“Updating Library and Drive Firmware” on page 4-34
“Viewing Accessor Statistics” on page 4-35
Top Level
Unlock I/O Station*
Unlock Magazine
Commands
Configuration
View Current Information
Logout
Service
→
→
→
Commands
Move Cartridge
Unload
Clean Drive
Inventory
Move to Ship Position
Reboot Drive
Configuration
Configure Library
Configure Auto Cleaning
Configure Network Settings
Configure Op Panel Settings
View Settings
Set Default
Service
View Error Status
Diagnostics
View Firmware Revision
Reboot Library
* If enabled.
Change Library State
Telnet Service Port*
* For use by IBM Technical
Support only.