IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 94 / 257

4-16
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Viewing the Library Map
Figure 4-31. Library Map screen
Use Monitor Library
→
Library Map to display a graphical view of the library. Each
component of the library is represented by a clickable icon. Select a component in the
library map to display detailed information for that component of the library on the
right side of the page. A grayed out column represents the I/O Station. The
information displayed varies according to the type of device selected:
• Library information
– Accessor status (OK, Degraded, or Failed)
– Drive status (OK, Degraded, or Failed)
– I/O Station (Enabled or Disabled)
– Auto cleaning (Enabled or Disabled)
– Magazine status (Inserted or Open)
– Library mode (Random or Sequential. In Sequential mode, Loop and Auto load
mode are also displayed)
• Ethernet information (click the Library component twice to access the Ethernet
information)
– Status
– Protocol
– IP addresses
– Addressing method
– Subnet mask
– Gateway address
– Library Worldwide node name
– MAC address
– Link speed
– NTP server
– SNMP trap
– E-mail address
a29z0115