IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 109 / 257

Chapter 4. Operations
4-31
The summary can be filtered to display the operator intervention log for a specific
hardware component and specific event levels. The log is stored in memory on the
library control board. When the memory buffer is full, new events overwrite the
oldest events. The log is not cleared from memory when power is turned OFF.
Click Refresh to read the log of operator interventions from the tape library. You can
select an event in the Index List panel to display data specific to that event in the
Detail panel.
The information displayed for the operator intervention event comprises:
• Index number of the event
• Date the event occurred
• Time the event occurred
• Unit in the library where the event occurred
• Event level
• Description of the event
Viewing Library Logs
Figure 4-51. View Library Logs screen
Use Service Library
→
View Library Logs to display a log history summary of errors
that have occurred.
The error log is displayed with sense data information. The summary can be filtered
to display errors with specific sense data code types.
Click Refresh to read the log of errors from the tape library. You can select an error in
the Index List panel to display data specific to that error in the Detail panel.
The information displayed for the error comprises:
• Index number of the error
• Date and time the error occurred
a29z0131