manualshive.com logo in svg

IBM System storage DS6000 Series, Redbook

The IBM System storage DS6000 Series offers high-performance storage solutions for businesses. Get a comprehensive overview of the product features and functionalities by downloading the user manual for free. Access the manual on manualshive.com to maximize the benefits of this cutting-edge technology.

Share
Download
background image

402

 

IBM System Storage DS6000 Series: Copy Services with IBM System z

Example 26-69   failback - erasing data on site 1 with data from site 2

dscli failbackpprc -type gcp -tgtread 6500:6500 6501:6501 -cfg $DSCLI/profile/DS-02.profile
Date/Time: June 15, 2005 12:32:27 PM EDT IBM DSCLI Version: 5.0.3.134 DS: IBM.2107-7573731
CMUC00197I failbackpprc: Remote Mirror and Copy pair 6500:6500 successfully failed back.
CMUC00197I failbackpprc: Remote Mirror and Copy pair 6501:6501 successfully failed back.

To query Global Copy information use the command 

lspprc

 as described in 26.11.2, “Query 

Global Copy pairs” on page 395.

26.12.3  Create a FlashCopy for backup

To create new FlashCopy relationships for one or several pairs of volumes, using DS CLI 
commands, it is necessary to perform a two-step procedure.

If FlashCopy pairs are in several LSSs, do not forget to select all of them during the process. 
If FlashCopy pairs are spread over several storage images, run this process on each of them.

The first step is to find out which volumes are available on the Global Mirror target storage 
image for establishing FlashCopy pairs. For a fixed block (FB) volume use the command:

dscli lsfbvol -lss <LSS_ID> -cfg <Device configuration file>

For CKD volumes use the command:

dscli lsckdvol -lss <LSS_ID> -cfg <Device configuration file>

Example 26-70 shows the 

lsfbvol

 command result.

Example 26-70   lsfbvol

dscli lsfbvol -lss 65 -cfg $DSCLI/profile/DS-02.profile
Date/Time: June 14, 2005 7:15:47 PM EDT IBM DSCLI Version: 5.0.3.134 DS: IBM.2107-7573731

Name         ID   accstate datastate configstate deviceMTM datatype extpool cap (2^30B) cap (10^9B) cap (blocks)
================================================================================================================
GM_TGT_GC01  6500 Online   Normal    Normal      2107-900  FB 512   P5              1.0           -      2097152
GM_TGT_GC02  6501 Online   Normal    Normal      2107-900  FB 512   P5              1.0           -      2097152
GM_TGT_JFC01 6502 Online   Normal    Normal      2107-900  FB 512   P5              1.0           -      2097152
GM_TGT_JFC02 6503 Online   Normal    Normal      2107-900  FB 512   P5              1.0           -      2097152
GM_TGT_FCA01 6504 Online   Normal    Normal      2107-900  FB 512   P5              1.0           -      2097152
GM_TGT_FCA02 6505 Online   Normal    Normal      2107-900  FB 512   P5              1.0           -      2097152

The second step is to create FlashCopy pairs. For this use the command 

mkflash

:

dscli mkflash -wait -tgtinhibit -cfg <Device configuration file> 
<Source_Volume>:<Target_Volume> <Source_Volume>:<Target_Volume> ...

Example 26-71 shows how to create two FlashCopy pairs on the storage unit on site 2, using 
volumes 

6500

 and 

6501

 as source volumes, and volumes 

6504

 and 

6504

 as target volumes.

Example 26-71   mkflash to create two FlashCopy pairs

dscli mkflash -record -nocp -cfg $DSCLI/profile/DS-02.profile 6500:6504 6501:6505 
Date/Time: June 14, 2005 3:35:09 PM EDT IBM DSCLI Version: 5.0.3.134 DS: IBM.2107-7573731
CMUC00137I mkflash: FlashCopy pair 6500:6504 successfully created.
CMUC00137I mkflash: FlashCopy pair 6501:6505 successfully created.

Note: The 

wait

 option is not required, but can help to know when the process is finished. 

The 

tgtinhibit

 option is also not required, but can prevent any misuse of the target 

volumes during the FlashCopy process.

Summary of Contents for System storage DS6000 Series



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System storage DS6000 Series

Oki C7300 Installation Instructions Manual preview
C7300
Brand: Oki Pages: 16
XenData X1 Installation And User Manual preview
X1
Brand: XenData Pages: 12
RAID Falcon 24-Bay Installation And Hardware Reference Manual preview
Falcon 24-Bay
Brand: RAID Pages: 108
StarTech.com IDECASE35SAT Instruction Manual preview
IDECASE35SAT
Brand: StarTech.com Pages: 8
G-Technology G-DRIVE mobile USB Product Manual preview
G-DRIVE mobile USB
Brand: G-Technology Pages: 32
LaCie 12big Rack Spare Quick Install Manual preview
12big Rack Spare
Brand: LaCie Pages: 4
JOBO GIGA ONE ULTRA Instruction Manual preview
GIGA ONE ULTRA
Brand: JOBO Pages: 20
Silverline 666247 Quick Start Manual preview
666247
Brand: Silverline Pages: 2
Lenovo Storage N4610 User Manual And Hardware Maintenance Manual preview
Storage N4610
Brand: Lenovo Pages: 176
Broadcom BroadNAS User Manual preview
BroadNAS
Brand: Broadcom Pages: 24
HOLZMANN MASCHINEN WB155TWIN Assembly Instruction Manual preview
WB155TWIN
Brand: HOLZMANN MASCHINEN Pages: 16
HOLZMANN MASCHINEN WB106MINI Assembly Instruction Manual preview
WB106MINI
Brand: HOLZMANN MASCHINEN Pages: 20
Westfalia 81 19 62 Instruction Manual preview
81 19 62
Brand: Westfalia Pages: 16
Teac HD-35TM User Manual preview
HD-35TM
Brand: Teac Pages: 14
Tumi Data Vault Quick Start Manual preview
Data Vault
Brand: Tumi Pages: 20
Texas Memory Systems RamSan-500 User Manual preview
RamSan-500
Brand: Texas Memory Systems Pages: 48
Western Digital WD1000FYPS Brochure & Specs preview
WD1000FYPS
Brand: Western Digital Pages: 2
OPTIARC CD-1100 Operating Instructions Manual preview
CD-1100
Brand: OPTIARC Pages: 12

Brands by name

Popular brands

Load more brands