Chapter 7. Administration - Enterprise
131
Draft Document for Review August 30, 2007 12:59 am
7065Admin_Enterprise.fm
If you are using a host running an agent to manage your storage subsystems you can use this
button to only rescan the selected host. To do this highlight the host, click this button and the
rescan window will appear (Figure 7-23). Select OK and the host will scan for newly attached
storage devices.
Figure 7-23 Rescan Single Host
Display Task Assistant
Figure 7-24 Display Task Assistant
This will start the Task Assistant wizard described in 7.1.1, “Task Assistant” on page 118.
Add Storage Subsystem to view
Figure 7-25 Add Storage Subsystem to view
Click this button to display the Add Storage Subsystem Window. Here you can add systems
manually to your Enterprise Window View. For out-of-band management, you have to provide
the IP address or host names of the controllers (Figure 7-26). If the storage subsystem has
dual controllers, you must provide the IP address of both controllers.
