Serial I/O Port Module Installation
3-3
Also included with each Expansion Module are two wall mounting
brackets and four screws. Attach the mounting brackets to the
appropriate modules and secure them to a wall as shown in Figure 3-3.
Attach one bracket on the top and one bracket on the bottom at
the opposite side of the Module when mounting a single Module
to a wall
☞
Use the nickel-plated screws to secure the coupler brackets to the
back of the Expansion Modules and the black-anodized screws to
secure the coupler brackets to the top and bottom of the expansion
modules.
☞
Figure 3-3. Coupling and Surface Mounting Two PM16-DB Port Modules
