![background image](http://html2.mh-extra.com/html/ibm/storwize-v7000/storwize-v7000_manual_3310372068.webp)
Each canister has two SAS ports that are numbered 1 on the left
1
and 2 on the
right
2
. Port 1 must be connected if you are adding one expansion enclosure.
Port 2 must be connected if you are adding a second expansion enclosure.
Note:
The reference to the left and right locations applies to canister 1, which is
the upper canister. The port locations are inverted for canister 2, which is the lower
canister.
Figure 17 shows the rear view of a Storwize V7000 Gen2 expansion enclosure and
identifies the location of power supply units and expansion canisters.
1
Expansion canisters
2
Power supply units
Figure 18 on page 49 shows the rear view of a Storwize V7000 Gen2 expansion
canister and identifies the SAS port locations.
svc00668
1
1
2
2
Figure 16. SAS ports and LEDs in rear of expansion enclosure
fab10006
2
1
IN
DC
!
OK
IN
DC
!
OK
Figure 17. Rear view of a Storwize V7000 Gen2 expansion enclosure
48
IBM Storwize V7000 Unified: Adding Storwize V7000 File Modules to an existing Storwize V7000 system 2073-720
Summary of Contents for Storwize V7000
Page 151: ......
Page 152: ...Part Number 00MJ333 Printed in USA SC27 4223 05 1P P N 00MJ333...