IBM Storwize V7000, Manual

Page: 37 / 152

You can configure up to two Ethernet ports for each file module if you have a 1
Gpbs Ethernet connection, and up to two Ethernet ports for each file module if
you have a 10 Gpbs Ethernet connection.
Table 20. File Module Ethernet connections
Port File module 1 (upper) File module 2 (lower)
Switch Port Speed Switch Port Speed
Ethernet
port 1 Ethernet port 1
on File module
2
Ethernet port 1
on File module
1
Ethernet
port 2 Ethernet port 2
on File module
2
Ethernet port 2
on File module
1
Ethernet
port 3
Ethernet
port 4
Ethernet
port 5
(10 Gbps
optical)
Ethernet
port 6
(10 Gbps
optical)
Ethernet
port 7
Ethernet
port 8
Ethernet
port 9
Ethernet
port 10
Note: The 1Gbps Ethernet port 1 of each file module are directly connected
together. The Ethernet port 2 of each file module are directly connected together.
Use Table 21 to plan the service addresses that are required to perform service
actions on individual node canisters in the control enclosure.
Table 21. Ethernet service address configuration for the control enclosure
Configuration item Value
Language
Node canister 1 service port 1
Service IPv4 address 192.168.70.121
Gateway IPv4 address
IPv4 subnet mask 255.255.255.0
Service IPv6 address
Gateway IPv6 address
Chapter 2. Planning for adding file modules
17