IBM Storwize V3700, Quick Installation Manual

Page: 67 / 82

– The IP address of a Network Time Protocol (NTP) server for automated
setting of date and time
– The IP address of a simple mail transfer protocol (SMTP) server for
sending notificatication of alerts
2. Locate the USB flash drive that was shipped with your order in the
documentation package.
3. Insert the USB flash drive into a USB port on the personal computer.
4. To launch the tool, open the USB flash drive. and double-click InitTool.bat
The initialization tool wizard starts.
5. In the wizard, click Next and select Create a new system .
6.
Follow the on-screen instructions given by the initialization tool. You will be
instructed to complete the following actions:
a. Enter the details of the system management address you wish to use.
b.
Take the USB flash drive to the Storwize system and allow it to initialize.
c. Return the flash drive to the workstation to check that the initialization
completed.
7. If the system initialization completed successfully, click Finish . If you have a
network connection to the Storwize system, the system management GUI is
displayed. If the workstation does not have a network connection to the
Storwize system, go to the workstation you will use to manage the system and
start a supported browser. Direct the browser to the management address you
specified for the system.
8.
Log in with user name
superuser
and password
passw0rd
.
Note: The
0
character in the password is a zero, not the letter O.
9. Follow the on-screen instructions to begin setting up your system.
Note: The other options that are available in the initialization tool are used to
recover the service IP address or the superuser password.
Initializing the system with an Apple Macintosh computer
To initialize a new system with an Apple Macintosh computer, use the
initialization tool that was shipped with your order.
Before you begin
v
Begin this procedure after you have installed all the enclosures, drives and other
options you have purchased.
v
You need a personal computer to complete the initialization procedure. The
personal computer must have:
– A USB port
– A supported browser (see “Web browser requirements to access the
management GUI” on page 45)
For best results, the personal computer and the Storwize system must be
connected to the same network.
About this task
This procedure is valid for Apple MacOS X 10.7.
v
Use this procedure only when initializing a new control enclosure (with,
optionally, one to four expansion enclosures).
Chapter 3. Configuring the system
47
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|