IBM RS/6000 7043 43P Series, Service Manual

Page: 103 / 273

Table 3-2 (Page 4 of 9). Firmware Error Codes.
Error Code Description Action/
Possible Failing FRU
002 Test Unit Ready Failed - sense data
available 1. Media (Removable media devices)
2. SCSI device
003 Send Diagnostic Failed 1. SCSI device
004 Send Diagnostic Failed - DevOfl cmd 1. SCSI device
21E00xxx SCSI Tape Refer to 21A00xxx (SCSI disk drive) for
xxx definitions
21ED0xxx SCSI Changer Refer to 21A00xxx (SCSI disk drive) for
xxx definitions
21EE0xxx Other SCSI device type Refer to 21A00xxx (SCSI disk drive) for
xxx definitions
21F00xxx SCSI CDROM Refer to 21A00xxx (SCSI disk drive) for
xxx definitions
21F20xxx SCSI Read/Write Optical Refer to 21A00xxx (SCSI disk drive) for
xxx definitions
25010xxx Flash
xxx=000 No diskette in drive Insert diskette containing firmware
image.
001 Diskette seek error 1. Retry function
2. Replace diskette drive
3. Replace diskette cable
4. Replace system board (See notes
on page 3-1.)
002 Diskette in drive does not contain an
*.IMG file. Insert diskette with firmware update file.
003 Cannot open OPENPROM package Replace system board. (See notes on
page 3-1.)
004 Cannot find OPENPROM node Replace system board. (See notes on
page 3-1.)
006 System id does not match image
system id Make sure correct firmware update
diskette is being used with this system.
007 Image has bad CRC Replace firmware updated diskette
008 Flash is write protected, update
cancelled 1. Turn off, turn on system unit and
retry.
2. Replace system board. (See notes
on page 3-1.)
009 Flash module is unsupported or not
recognized Make sure correct firmware update
diskette is being used with this system.
Chapter 3. Error Code to FRU Index for Model 140 and Model 240
3-7