IBM Power System S821LC, Installing

Page: 103 / 132

DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or
multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and power
cables. (L003)
(L005)
>240VA
CAUTION: Hazardous energy present. Voltages with hazardous energy might cause heating when
shorted with metal, which might result in splattered metal, burns, or both. (L005)
6.
Place the system into the service position. For instructions, see “Placing an 8001-12C system into the
service position” on page 97.
CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is
intended for use as a shelf. (R008)
(L012)
or
CAUTION: Pinch hazard. (L012)
7. Remove the service access cover. For instructions, see “Removing the service access cover from an
8001-12C or 8005-12N system” on page 95.
Preparing the 8001-12C or 8005-12N system for operation after you
remove and replace internal parts
Learn how to prepare the IBM Power System S821LC (8001-12C) or the IBM CS821 (8005-12N) system for
operation after you remove and replace internal parts.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
Installing and configuring the system
87