IBM Power System 8284-22A Installing Instructions Download Page 45 | Manualshive

Page: 45 / 66

background image

a.

Open the front door of the managed system.

b.

Press the power button on the control panel. For instructions, see Starting a system that is not
managed by an HMC (http://www.ibm.com/support/knowledgecenter/POWER8/p8haj/
startsysnohmc.htm).

4.

Install an operating system and update the operating system.

v

Install the AIX operating system. For instructions, see Installing AIX (http://www.ibm.com/
support/knowledgecenter/POWER8/p8hdx/p8hdx_installaix.htm).

v

Install the IBM i operating system. For instructions, see Installing IBM i (http://www.ibm.com/
support/knowledgecenter/POWER8/p8hdx/p8hdx_ibmi.htm).

v

Install the Linux operating system. For instructions, see Installing Linux (http://www.ibm.com/
support/knowledgecenter/POWER8/p8hdx/p8hdx_installlinux.htm).

v

Install the VIOS operating system. For instructions, see Installing VIOS (http://www.ibm.com/
support/knowledgecenter/POWER8/p8hch/p8hch_installvios.htm).

5.

Update the system firmware, if required.

v

For instructions to get firmware fixes through the AIX or Linux operating system, see Getting
server firmware fixes through AIX or Linux without a management console (http://www.ibm.com/
support/knowledgecenter/POWER8/p8ha5/fix_firm_no_hmc_aix.htm).

v

If you are using IBM i, use the IBM i PTF installation functions to install the server firmware fixes.

v

If you are using VIOS, see Updating the Virtual I/O Server's firmware and device microcode with
an Internet connection (http://www.ibm.com/support/knowledgecenter/POWER8/p8ha5/
fix_virtual_firm_ivm.htm).

6.

You have now completed the steps to install your server.

Installing the IBM Power System S822 (8284-22A)

31

«
...
43
44
45
46
47
...
»

Summary of Contents for Power System 8284-22A



































































Reviews:

No comments

Related manuals for Power System 8284-22A

Brand: Hainbuch Pages: 72

Brand: cable matters Pages: 13

Brand: IFM Electronic Pages: 6

Brand: Hama Pages: 38

Brand: Laird Pages: 46

Brand: Ampetronic Pages: 2

I2C-RS232-Adapter

Brand: COPTONIX Pages: 15

Brand: Eurotronic Pages: 2

Brand: Planet Pages: 72

Brand: Aiphone Pages: 2

Brand: Energenie Pages: 9

Brand: Hamlet Pages: 5

Brand: Inteltronic Pages: 1

Brand: Sygonix Pages: 8

Brand: POPCORN HOUR Pages: 2

Brand: Mi Home Pages: 13

Brand: Qlogic Pages: 82

Brand: Sony Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands