IBM POWER GXT4000P, Installation And Using Manual

Page: 29 / 40

Chapter 7. Stereo-Ready System Unit, Sync and Power-Supplied
The POWER GXT4000P and POWER GXT6000P graphics adapter are stereo-ready
(sync- and power-supplied) and require attachment of a stereo device such as
StereoGraphics CrystalEyes Stereoscopic System. This system comes complete with
eyewear (model CE-PC) and emitter (ENT REV B or higher).
Note: Use only an emitter that has a permanently attached cable and no connectors or
switches on the rear. This emitter is manufactured to work with the POWER
GXT4000P or POWER GXT6000P graphics adapter.
Emitter models that have only a DB-9 connector cannot be used with the POWER
GXT4000P or POWER GXT6000P.
1
2
3
4
5
6
1 Graphics System Unit
2 Emitter Cable
3 Emitter
4 Monitor
5 Video Display Cable
6 Eyewear
In this configuration, both sync signal and power are supplied by the adapter to the
emitter.
1. Connect the end of the emitter cable to the 3-pin mini-jack on the POWER
GXT4000P or POWER GXT6000P adapter.
2. Connect the video display cable from the adapter to the monitor.
3. Attach your stereo cable to your graphics adapter prior to powering on your system
unit.
19