IBM POWER GXT4000P, Installation And Using Manual

Page: 11 / 40

Chapter 1. Overview
The POWER GXT4000P and POWER GXT6000P graphics adapters are single card
adapters that attach to your system unit in a PCI bus slot. The PCI bus interface
provides 64 bit, 66MHz (50MHz systems) and bus master support and requires 3.3 volt
power. These adapters provide 3D graphics acceleration. Connection to the video
monitor is made through a DVI (Digital Video Interface) connector.
Refer to the PCI Adapter Placement Reference for supported system units and
supported slot locations.
Note: Be sure to retain your proof of purchase as it might be required to receive
warranty service.
The POWER GXT4000P Adapter supports the following:
v
24 bit double-buffered up to 1920x1200
v
8 bit double-buffered alpha
v
4/8 bit overlay double-buffered
v
8 bits of window IDs
v
24 bit Z-buffer
v
8 bit stencil/clip planes
v
OpenGL 1.2, graPHIGS, GLX 1.3, X 11R6
v
3D Acceleration:
– Depth Buffering
– Antialiasing
– Gouraud shading
– Fog and atmospheric effects
– Stencil test
– Alpha test
Figure 1. POWER GXT6000P Top View; (POWER GXT4000P does not include shaded technology)
1