Configuring Startup Devices
Startup devices are devices where the computer looks for an operating system when
it is powered on. After adding new devices to the computer, you might want to
change the sequence of the startup devices. You can use the Configuration/Setup
Utility program to change the sequence of startup devices.
To change the sequence of startup devices:
1
Start the Configuration/Setup Utility program (see “Starting the
Configuration/Setup Utility Program” on page 80).
2
Select Start Options from the Configuration/Setup Utility menu.
3
Select Startup Sequence.
4
Select First Startup Device from the Primary Startup Sequence.
5
Use the arrow keys to make your selection and press Enter.
6
If necessary, repeat step 5 for the Second Startup Device, Third Startup
Device
, and Fourth Startup Device.
7
If Automatic Power On Startup Sequence is enabled, repeat steps 3-5 to select
the startup devices for Automatic Power On Startup.
8
Press Esc to return to the main menu.
9
Select Save Settings and press Enter.
84
Installing Options in Your Personal Computer
All manuals and user guides at all-guides.com
Summary of Contents for PC 300PL
Page 2: ...All manuals and user guides at all guides com...
Page 14: ...xii Installing Options in Your Personal Computer All manuals and user guides at all guides com...
Page 99: ...Chapter 7 Completing the Installation 85 All manuals and user guides at all guides com...
Page 111: ...All manuals and user guides at all guides com a l l g u i d e s c o m...
