Upgrading Software
8-13
When the OK button is selected, the status of the
upgrade is displayed. The following error and status
messages are available:
Error Messages
This section lists error messages that may appear if an
error occurs while downloading a new software
image, and suggests solutions to the problem.
File Not Found
The file you require is not on the specified TFTP server.
You need to specify a different TFTP server or transfer
the file you require to the correct directory on the
TFTP server and try again.
Access Violation
You do not have access permissions to this file or
directory. Ensure that the access permissions are
changed.
Load server failed to respond
Communication with the TFTP server could not be
established. Ensure that the workstation on which the
TFTP server is set up is operating and that the network
connection has been set up correctly.
The download could not be started because of a
lack of resources
You are trying to download a file which requires more
memory than is available.
The record length differs from that implied by the
value of the record length field.
The file you want to download may have been
corrupted. You should obtain a valid file and try
again.
The record type is not recognized
The file you want to download may have been
corrupted, or is not the correct type of file for the
selected device. You should obtain a valid file and try
again.
Record checksum error
The file you want to download has been corrupted. In
this case you should either retry with the current file,
or obtain a valid file and try again.
The device type in the file is incorrect
The file you are trying to download is not suitable for
the selected device. Ensure that you select either a
different file or a different device, before you try again.
The software image is not suitable for this
version of the hardware
The file you are trying to download is not suitable for
the selected device. Ensure that you select either a
different file or a different device, before you try again.
Timeout
The operation to download the software failed after
the operation timed-out. This may be due to a poor
network connection, so try again.
If you see any other messages you should make a
note of the message and contact your supplier.
Summary of Contents for OPTIONS ATM OC-3c
