IBM NetVista 8302, Hardware Maintenance Manual

Page: 77 / 314

Chapter 6. FRU Removals
These removals are to be done by trained service technicians only.
Important: Before you install or remove any option, read “Safety information” on
page 271. These precautions and guidelines will help you work safely.
Removing the cover Types 8301 and 8302
To replace a microprocessor on any of the machine types, do the following:
1.
Turn off the computer and peripheral devices and disconnect all external cables
and power cords.
2. Unlock and remove the Hard Disk Drive. See “Hard disk drive removal” on
page 73.
3. Remove the front bezel by inserting a finger and pressing down on the tab as
shown in the bubble, detaching from the right side and lifting it off.
4. Remove the 2 front and 2 back screws holding the cover in place.
5. Slide the top cover toward the front of the box and lift off.
Removing the CD-ROM drive Types 8301 and 8302
To remove the CD-ROM drive from these machine types, do the following:
© Copyright IBM Corp. 2001
71