background image

 38

IBM®  Netfinity® 6000R Installation Guide

 

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION 
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

IBM Statement of Warranty Worldwide except Canada, 
Puerto Rico, Turkey, United States (Part 1 – General 
Terms)

This Statement of Warranty includes Part 1 - General Terms and Part 2 - Country-
unique Terms.  The terms of Part 2 may replace or modify those of Part 1. The 
warranties provided by IBM in this Statement of Warranty apply only to Machines 
you purchase for your use, and not for resale, from IBM or your reseller. The term 
"Machine" means an IBM machine, its features, conversions, upgrades, elements, or 
accessories, or any combination of them.  The term "Machine" does not include any 
software programs, whether pre-loaded with the Machine, installed subsequently or 
otherwise. Unless IBM specifies otherwise, the following warranties apply only in the 
country where you acquire the Machine. Nothing in this Statement of Warranty 
affects any statutory rights of consumers that cannot be waived or limited by contract. 
If you have any questions, contact IBM or your reseller.

Machine - Netfinity 6000R

Warranty Period* - Three Years

*Contact your place of purchase for warranty service information. Some IBM 
Machines are eligible for On-site warranty service depending on the country where 
service is performed.

The IBM Warranty for Machines
IBM warrants that each Machine 1) is free from defects in materials and workmanship 
and 2) conforms to IBM’s Official Published Specifications. The warranty period for a 
Machine is a specified, fixed period commencing on its Date of Installation.  The date 
on your sales receipt is the Date of Installation, unless IBM or your reseller informs 
you otherwise.

During the warranty period IBM or your reseller, if approved by IBM to provide 
warranty service, will provide repair and exchange service for the Machine, without 
charge, under the type of service designated for the Machine and will manage and 
install engineering changes that apply to the Machine.

If a Machine does not function as warranted during the warranty period, and IBM or 
your reseller are unable to either 1) make it do so or 2) replace it with one that is at 
least functionally equivalent, you may return it to your place of purchase and your 
money will be refunded. The replacement may not be new, but will be in good 
working order.

Extent of Warranty
The warranty does not cover the repair or exchange of a Machine resulting from 
misuse, accident, modification, unsuitable physical or operating environment, 
improper maintenance by you, or failure caused by a product for which IBM is not 
responsible. The warranty is voided by removal or alteration of Machine or parts 
identification labels.

THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE 
ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR 

Summary of Contents for Netfinity 6000R



































































Reviews: